 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS UH Chip Type, High Reliability, Higher Capacitance Range series Chip Type, higher capacitance in larger case sizes (12.5, 16, 18, 20) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape and tray. Adapted to the RoHS directive (2002/95/EC). UH High Temperature Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan UJ Performance Characteristics - 55 ~ +125C 10 ~ 50V 100 ~ 3300F 20% at 120Hz, 20C After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. Rated voltage (V) tan (MAX) Rated voltage (V) 10 0.22 16 0.18 25 0.16 35 0.14 50 0.12 120Hz 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 Within 30% of initial value 300% or less of initial specified value Initial specified value or less 120Hz Stability at Low Temperature Impedance ratio Z-25C / Z+20C ZT / Z20 (MAX.) Z-40C / Z+20C Endurance After 5000 hours' application of rated voltage at 125C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Shelf Life Marking After storing the capacitors under no load at 125C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. Black print on the case top. Chip Type Trade mark Voltage Lot No. nichicon A0.2 Plastic platform B0.2 Type numbering system (Example : 50V 330F) UUH 1 H 3 3 1 M NL 1 MS C0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Package code Taping MS Tray ZD Configuration Code BD 12.5~18 NL RL 20 330 F UH 50V H0536 D0.5 B0.2 B E Series Capacitance BD A B C E H 12.5 4.0 13.6 16.0 8.0 2.5 10 1A 16. 4.5 17.1 19.5 10.5 3.75 18. 5.0 19.1 21.5 11.5 3.75 (mm) 20. 5.0 21.1 23.5 13.5 3.75 H0.1 The lead terminal structure : The same bent lead type (refer to p.60) that is currently used on 10mm diameter and smaller parts, is also available upon request. In this case of the bent lead type, Q will be put at the 11th digit of type numbering system. Please ask for details. 16 1C 25 1E Dimensions (F) Cap. V Code A0.2 Pressure relief vent Size code L0.5 Capacitance Tolerance ( 20%) Rated Capacitance (330F) Rated voltage (50V) Series name Type 35 1V 12.5 x 13.5 100 220 330 470 1000 2200 3300 101 221 331 471 102 222 332 12.5 x 13.5 12.5 x 16.5 18 x 16.5 16 x 21.5 18 x 21.5 230 350 620 620 770 12.5 x 13.5 12.5 x 13.5 16 x 16.5 18 x 21.5 210 250 440 710 12.5 x 13.5 16 x 16.5 18 x 21.5 20 x 16.5 230 310 540 540 200 280 380 380 610 50 1H 12.5 x 13.5 16 x 16.5 16 x 21.5 18 x 16.5 18 x 21.5 170 250 340 340 430 16 x 16.5 18 x 16.5 16 x 21.5 20 x 21.5 Case size D x L (mm) Rated Ripple In this case, 6 will be put at 12th digit of type numbering system, " " Rated Ripple (mArms) at 125C 120Hz Frequency coefficient of rated ripple current Cap.(F) Frequency 0100 ~ 4700 1000 ~ 3300 50 Hz 0.80 0.85 120 Hz 1.00 1.00 300 Hz 1.23 1.10 1 kHz 1.34 1.13 10 kHz~ 1.50 1.15 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UUH1V331MNL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |